Filter
Top Products
GS700TS Hardware Installation Guide
3-22 Physical Description
v1.0, November 2007
Port LEDs
The following table describes the port LED designations.
System LEDs
The following table describes the system LED designations.
Table 3-1. Port LEDs
Port LED Designation
24/48-10/100/1000 Ports
- One LED/Port
Link/ACT LED • Off - No 10/100Mbps link is established on the port.
• Solid Green - A valid 100Mbps link is established
on the port.
• Flashing Green - Packet transmission or reception
is occurring on the port at 100Mbps.
• Solid Yellow - A valid 10Mbps link is established on
the port.
• Flashing Yellow - Packet transmission or reception
is occurring on the port at 10Mbps.
4-SFP Ports - One LED/
Port
SFP Link/ACT LED • Off - No link is established on the port.
• Solid Green - A valid link is established on the port.
• Flashing Green - Packet transmission or reception
is occurring on the port.
Table 3-2. System LEDs
LED Designation
Stack ID LED - One Seven
segment LED Display
• Green - Displays Stack ID (1-6).
Stack Master LED • Off - Switch acts as a slave member in a stack of switches.
• Solid Green - Switch acts as a master unit in a stack of switches.
The Stack Master LED is lit if there is an active stack link, and the
unit is in stack mode.
Stack Up LED Indicates the Up stacking port LED designations
• Off - Indicates the Up stacking port link is down.
• Solid Green - Indicates the Up stacking port link is up.
• Flashing Green - Packet transmission or reception is occurring on
the Up stacking port.