Filter
Top Products
Reference Manual for the ADSL Modem Wireless Router DG834GSP
5-14 Protecting Your Network
v1.0, June 2007
Select the Adjust for daylight savings time check box if your time zone is currently in
daylight savings time.
4. The modem router has a list of NETGEAR NTP servers. If you would prefer to use a particular
NTP server as the primary server, enter its IP address under Use this NTP Server.
5. Click Apply to save your settings.
How to Schedule Firewall Services
If you enabled services blocking in the Block Services menu or Port forwarding in the Ports menu,
you can set up a schedule for when blocking occurs or when access is not restricted.
1. Log in to the modem router at its default LAN address of http://10.1.1.1 with its default User
Name of admin, default password of password, or using whatever Password and LAN
address you have chosen for the modem router.
2. Select the Schedule link of the Content Filtering menu to display menu shown above.
3. To block Internet services based on a schedule, select Every Day or select one or more days. If
you want to limit access completely for the selected days, select All Day. Otherwise, to limit
access during certain times for the selected days, enter Start Blocking and End Blocking times.
4. Enter the values in 24-hour time format. For example, 10:30 am would be 10 hours and 30
minutes and 10:30 pm would be 22 hours and 30 minutes. If you set the start time after the end
time, the schedule will be effective through midnight the next day.
5. Click Apply to save your changes.
Note: If your region uses Daylight Savings Time, you must manually select Adjust
for Daylight Savings Time on the first day of Daylight Savings Time, and
clear it at the end. Enabling Daylight Savings Time will cause one hour to be
added to the standard time.