NETGEAR DG834GSP Network Router User Manual


 
Reference Manual for the ADSL Modem Wireless Router DG834GSP
3-4 Configuring Your Internet Connection
v1.0, June 2007
Manual Setup Procedure
There are four steps to setting up your modem router:
1. Install ADSL filters on the phone lines.
2. Connect the modem router to the ADSL line.
3. Log in to the modem router.
4. Connect to the Internet.
Follow the steps below to connect your modem router to your network. Before you begin, locate
the ADSL configuration information from your Internet Service Provider (ISP).
1. Connect the ADSL filter.
a. You need to install an ADSL filter for every telephone that uses the same phone line as
your modem router. Select the filter that came with your modem router.
Note: If you purchased the DG834GSP in a country where an ADSL filter is not
included, you must acquire one.
1. One-Line Filter: Use with a phone or fax machine.
2. Splitter: Use with a one-line filter to share an outlet with a phone and the
modem router.
3. Two-Line Filter with Splitter: Use to share an outlet with a phone and the modem router.
Figure 3-3
Phone
Phone
DSL
Line
1
2
3