Filter
Top Products
Reference Manual for the ADSL Modem Wireless Router DG834GSP
4-10 Wireless Configuration
v1.0, June 2007
2. From the Wireless Settings menu, Wireless Station Access List section, click the Setup Access
List button to display the list, shown below:
3. Select the Turn Access Control On check box to enable restricting wireless computers by
their MAC addresses.
4. If the wireless station is currently connected to the network, you can select it from the
Available Wireless Stations list. Click Add to add the station to the Trusted Wireless Stations
list.
5. If the wireless station is not currently connected, you can enter its address manually. Enter the
MAC address of the authorized computer. The MAC address is usually printed on the wireless
card, or it may appear in the modem router’s DHCP table. The MAC address will be 12
hexadecimal digits.
Click Add to add your entry. You can add several stations to the list, but the entries will be
discarded if you do not click Apply.
Figure 4-4