Filter
Top Products
November 2010
©2010 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of
NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or
registered trademarks of their respective holders. Information is subject to change without notice.
This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste
Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union,
this product should be treated and recycled in accordance with the laws of your jurisdiction
implementing the WEEE Directive.
Manual Installation (Linux, Mac, or PC with No CD Drive)
1. Follow Steps 1 - 3 to connect the DGN2200 modem router to your computer.
2. Che
ck that the power LED is green, and if not, power on the modem router and
wait for the power LED light to turn green.
Set up Internet Connectivity
1. Type http://www.routerlogin.net in the web browser address bar. Press Enter.
2. Ty
pe admin for the user name and password for the password. Click OK.
3. Select Set
up Wizard in the top-left corner and make sure Yes is selected under
Auto-Detect Connection Type. Click Next to complete the Setup Wizard.
4. Select Ba
sic Settings to see your settings.
Note: If your Internet Service Provider (ISP) requires you to log in, enter your ISP
login information when prompted. The ISP login is not the same as the router login.
If you do not have your ISP login information, contact your ISP and record it here:
ISP user name: ___
_______________________
ISP password: __
_________________________
Preset Wireless Security
This product has a preset unique Wifi Network Name (SSID) and WPA/WPA2-
PSK passphrase that are located on the label on the bottom of the product. The
default SSID and passphrase are uniquely generated for every device to protect
and maximize your wireless security.
NETGEAR recommends that you not change
the WiFi Network Name (SSID)
and network key (password). If you change these settings during the installation
process, the information on the bottom of the product does not apply.
WiFi Network Name (SSID) and Network Key (Password)
If you changed the default wireless settings, record them here:
Wireless Network Name (SSID) _
_____________________
Wireless Security Passphrase _
______________________
To retrieve your passphrase, type ht
tp://www.routerlogin.net and log in with the
user name admin and your password (default is password). Select Wireless
Settings to retrieve your passphrase.
Connect Wireless Devices to Your Router
Choose either the manual or WiFi Protected Setup (WPS) method to add wireless
devices and other equipment to your wireless network.
Manual Method
1. Open the software that manages your wireless connections on the wireless
device (laptop computer, gaming device, iPhone) that you want to connect to
your router. This tool scans for all wireless networks in your area.
2. Lo
ok for your network and select it. If you did not change the name of your
network during the setup process, look for the default WiFi Network Name
(SSID) and select it. The default WiFi Network Name (SSID) is located on the
product label on the bottom of the router.
3. Enter
the passphrase and click Connect. The default passphrase is located on
the product label on the bottom of the router.
4. Rep
eat steps 1 – 3 to add other wireless devices.
WPS Method
If your wireless device supports WPS (Push 'N' Connect), follow these steps:
1. Pre
ss the WPS button on the router. It looks similar to .
2. Within
2 minutes, press the WPS button on your wireless device, or follow the
WPS instructions that came with your wireless device. The device is now
connected to your router.
3. Rep
eat steps 1 - 2 to add other WPS wireless devices.
Note: WP
S does not support WEP security. If you try to connect a WEP client to
your network using WPS, it will not work.
For complete DoC please visit the NETGEAR EU Declarations of Conformity website at:
http://kb.netgear.com/app/answers/detail/a_id/11621/