NETGEAR DM602 Network Router User Manual


 
Reference Manual for the Model DM602 ADSL Modem
Advanced Configuration of the Modem 5-5
Modem Device Mode Status
In Modem Device Mode, from the Main Menu of the browser interface, click on Modem Status to
display the System Status screen, shown in
Figure 5-4 will appear.
Figure 5-4. Modem Status screen
This screen shows the following parameters:
Table 5-3. Router Status Fields
Field Description
Firmware Version This field displays the modem firmware version.
LAN Port These IP parameters apply to the Local Area Network (LAN) of the
modem.
MAC Address This field displays the Ethernet MAC address being used by the LAN
port of the modem.
IP Address This field displays the IP address being used by the ADSL (WAN) port of
the modem. If no address is shown, the modem cannot connect to the
Internet.
IP Subnet Mask This field displays the IP Subnet Mask being used by the ADSL(WAN)
port of the modem.
DM602.book Page 5 Friday, October 4, 2002 4:22 PM