NETGEAR FS102 Switch User Manual


 
Model FS102, Model FS104, Model FS108 Fast Ethernt Switch Installation Guide
LEDs
This table describes the activity of the Model FS102/FS104/FS108 switch LEDs.
Label Color Activity Description
Pwr (Power) Green On
Off
Power is supplied to the switch.
Power is disconnected.
Rx/Tx/Collision Green
Ye l l o w
Blinking
Blinking
Packet transmission or reception is occurring on the port.
Data collisions are occurring on the port. The blinking action
corresponds to the number of collisions. When a collision
occurs, the connected device pauses and transmits again
after waiting a specified time. Note that occasional collisions
are normal.
100 Mbps Green On
Off
The port is operating at 100 Mbps.
The port is operating at 10 Mbps.
Link
(located at the
top left corner
of each vista
10BASE-T port)
Green On
Off
A valid link is established on the port.
A link is not established on the port.
FDX
(located at the
top right corner
of each vista
10BASE-T port)
Green On
Off
The port is operating in full-duplex mode.
The port is operating in half-duplex mode.