NETGEAR FS605 v3 Switch User Manual


  Open as PDF
of 4
 
Unpack the Box and Verify the
Contents
When you open the box, verify that you received everything. The package includes:
• 5/8-Port Fast Ethernet Switch FS605 v3/FS608 v3
• AC power adapter
• FS605 v3/FS608 v3 Installation Guide (this document)
• Warranty and support information card
• Vertical stand
If you don’t have everything listed above, see the support information card for contact
information. If you’re missing the Technical Support information card itself, get contact
information at www.NETGEAR.com in the Customer Service area.
Installation guide,
warranty/registration card
and support
information card
Power adapter
Stand
Fast Ethernet Switch FS605 v3/FS608 v3
1
1
Prepare to Install the Switch
Decide where you want to place the switch. Find a flat horizontal surface — such as a table,
desk or shelf.
Make sure the selected location is:
• Not in direct sunlight or near a heater or heating vent.
• Not cluttered or crowded. There should be at least 2 inches (5 cm) of clear space on all
sides of the switch.
• Well ventilated (especially if it is in a closet).
Also, you’ll need one Category 5 (Cat 5) Ethernet cable with RJ-45 connectors for each device
you want to connect to the switch. Each Ethernet cable must be less than 328 feet (100 meters).
2
2
 previous