Filter
Top Products
FS728TP Smart Switch Software Administration Manual
3-4 Managing System Settings
v1.1, September 2009
The IP Configuration screen contains the following fields:
• Get Dynamic IP from DHCP Server – Enables the IP address to be configured
automatically by the DHCP server. Selecting this field disables the IP Address, Subnet
Mask, Gateway and Delete fields. This is the default value.
• Static IP Address – Enables the user to define a static IP address.
• IP Address – Enter the static IP address used to manage the device.
• Subnet Mask – Enter the IP address mask.
• Gateway – Enter the default gateway IP address. The following option is available:
– Delete – Deletes the default gateway IP address.
• Management VLAN ID – Select an existing VLAN to be defined as the management
VLAN. By default, the default VLAN defined on the device is VLAN1.
2. Select the method of assigning the IP address by selecting either Get Dynamic IP from
DHCP Server or Static IP Address.
3. If you selected Static IP Address, enter the IP Address, Subnet Mask and Gateway address.
4. Select a VLAN in the Management VLAN ID in the provided fields.
Figure 3-2