![](http://pdfasset.owneriq.net/3/ab/3ab55dcf-dd73-4604-9f2f-0e22b5679ec5/3ab55dcf-dd73-4604-9f2f-0e22b5679ec5-bg15.png)
2-7physical description
Reset Button
A reset button is located on the front panels of the FS726 and FS750 Switches.The
button allows you to reinitialize the switches after you either insert or remove a module
from a module bay.To activate the Reset button, insert a small wire, such as a paper
clip, into the hole and gently push. As the switch reinitializes, all of the LEDs will
extinguish, then light up for approximately one second during the self-test, and then
return to their normal state.The switch will then operate as normal with the new
bay configuration.