Filter
Top Products
ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual
C-4 VPN Configuration of NETGEAR FVG318
v1.0, September 2007
Configuring the VPN Tunnel
This scenario assumes all ports are open on the FVG318.
Use this scenario illustration and configuration screens as a model to build your configuration.
1. Log in to the FVG318 labeled Gateway A.
Log in at the default address of http://192.168.0.1 with the default user name of admin and
default password of password (or using whatever password and LAN address you have
chosen).
2. Use the VPN Wizard to configure the FVG318 at Gateway A.
• Connection Name: Scenario_1 (in this example)
• Pre-Shared Key: 12345678 (in this example), must be the same at both VPN tunnel
endpoints
• Remote WAN IP address: 22.23.24.25 (in this example), must be unique at each VPN
tunnel endpoint
• Remote LAN IP Subnet
– IP Address: 172.23.9.1 (in this example), must be unique at each VPN tunnel endpoint
Security Scheme: IKE with Preshared Secret/Key
IP Addressing:
NETGEAR-Gateway A Static IP address
NETGEAR-Gateway B Static IP address
Figure C-3
Note: Based on the network addresses used in this example, you would log in to the
LAN IP address of http://10.5.6.1 at Gateway A.
Table C-1. Policy Summary
FVG318
FVG318