![](http://pdfasset.owneriq.net/f/91/f91d997b-072a-4ac2-8c1b-e9d6288f6192/f91d997b-072a-4ac2-8c1b-e9d6288f6192-bg51.png)
Reference Manual for the ProSafe VPN Firewall FVS114
Basic Virtual Private Networking 5-25
202-10098-01, April 2005
6.
Repeat for the FVS114 on LAN B. Pay special attention and use the following network
settings as appropriate.
• WAN IP of the remote VPN gateway (e.g., 14.15.16.17)
• LAN IP settings of the remote VPN gateway:
— IP Address (e.g, 192.168.0.1)
— Subnet Mask (e.g., 255.255.255.0)
— Preshared Key (e.g., 12345678)
7. Use the VPN Status screen to activate the VPN tunnel by performing the following steps:
a. Open the FVS114 management interface and click on VPN Status under VPN to get the
VPN Status/Log screen (Figure 5-30).
Figure 5-30: VPN Status/Log screen
b.
Click on VPN Status (Figure 5-32) to get the Current VPN Tunnels (SAs) screen
(Figure 5-31). Click on Connect for the VPN tunnel you want to activate.
Note: The VPN Status screen is only one of three ways to active a VPN tunnel. See
“Activating a VPN Tunnel” on page 5-26 for information on the other ways.