Filter
Top Products
Troubleshooting
The Power light is not lit
The switch has no power.
• Make sure the power cord is properly connected to the switch.
• Make sure the power adapter is properly connected to a functioning power outlet. If it’s in
a power strip, make sure the power strip is turned on. If the socket is controlled by a light
switch, make sure the switch is in the on position.
• Make sure you are using the NETGEAR power adapter supplied with your switch.
The Port number light is not lit for a connected device or
stays on continuously
There’s a hardware connection problem.
• Make sure the cable connectors are securely plugged in at the switch and the device.
• Make sure the connected device is turned on.
• If the Ethernet cable is connected to a NIC or other Ethernet adapter, make sure the card
or adapter is installed correctly and is working.
• Make sure the cable is less than 328 feet (100 meters).
Technical Specifications
Standards Compatibility: IEEE 802.3i 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet,
1000BASE-T Gigabit Ethernet.
IEEE 802.3x Flow Control; Jumbo frame 9K, IEEE 802.1p priority, DSCP
priority, compatible with Windows
®
, Mac
®
OS, NetWare
®
, Linux
®
Network Interface: RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-T Ethernet interface
Power: 12 W max and 12 V @ 1A DC input
Physical Dimensions: W: 158 mm (6.22") D: 101 mm (3.98") H: 27mm (1.0")
Weight: 0.518 kg (1.14 lbs)
Operating Temperature: 0 to 50° C (32 to 122° F)
Operating Humidity: 10% t0 90% relative humidity, non-condensing
Electromagnetic Compliance: CE mark, Commercial; FCC Part 15, Class A; EN 55 022 (CISPR 22), C-Tick
Safety Agency Approvals for
the Power Adapter: CE mark, Commercial UL listed (UL 1950), C-Tick
Performance Specifications
Frame Filter Rate: 14,800 frames/sec max for 10M port / 148,800 frames/sec max for
100M port/1,488,000 frames/sec for 1000M port
Frame Forward Rate: 14,800 frames/sec max for 10M port / 148,800 frames/sec max for
100M port / 1,488,000 frames/sec max for 1000M port
Network Latency: 100 Mbps to 100 Mbps: 40 µs max
(using 64-byte packets) 1000 Mbps to 1000 Mbps: 10 µs max
Address Database Size: 4000 MAC addresses
Addressing: 48-bit MAC address
Packet Buffer Memory: 128 KB Embedded