84
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
In the following screen, ports 6, 7, and 8 are being added as tagged members to VLAN 2.
6. From the Group Operations list, select an identical configuration for all the ports.
The possible values are:
• T
ag All. All frames transmitted for this VLAN are tagged. All the ports are included in
the VLAN.
• Untag All.
All frames transmitted from this VLAN are untagged. All the ports are
included in the VLAN.
• Remove All. Exclude all ports from the selected VLAN.
7. Click APPL
Y to send the updated configuration to the switch.
Configuration changes take effect immediately.
Port VLAN ID Configuration
The Port PVID Configuration screen lets you assign a port VLAN ID (PVID) to an interface. A
PVID has the following requirements:
• All ports must have a defined PVID.
• If no other value is specified, the default VLAN PVID is used.
• If you want to change the port’
s default PVID, you must first create a VLAN that includes
the port as a member.
• Use the Port VLAN ID (PVID) Configuration screen to configure a virtual LAN on a port.