NETGEAR GSM7352Sv2 Switch User Manual


  Open as PDF
of 3
 
ProSafe
®
24-port and 48-port Gigabit L3 Managed Stackable Switches GSM7328Sv2, GSM7352Sv2
Technical Specifications
•Physical Interfaces
– 24 or 48 RJ45 10/100/1000 ports with
Auto-Uplink™
– 4 shared SFP ports for fiber Gigabit
interfaces
– 2 built-in 10 Gigabit SFP+ ports
– 2 optional 10 Gigabit module bays
– RS-232 console
– USB port
‡
•Layer 2 Services
– IEEE 802.1Q Static VLAN (Up to
4k VLAN ID)
– IEEE 802.1p Class of Service (CoS)
– IEEE 802.1D Spanning Tree Protocol
– IEEE 802.1v Protocol VLAN & Port
VLAN
– Voice VLAN
– Guest VLAN
– IP subnet VLAN
– MAC-based VLAN
– IEEE 802.1 Q-in-Q
– IEEE 802.1w Rapid Spanning Tree
– IEEE 802.1s Multiple Spanning Tree
– IEEE 802.3ad Link Aggregation (Static
or LACP) up to 48 trunks
– IEEE 802.1x Port Access Authentication
– IGMP v1, v2, v3 snooping support
– IGMP querier
– Network storm protection including
broadcast, multicast and unicast traffic
– Static multicast filtering
– Port locking
– Ingress rate limit in 1 Kbps increments
– GARP/GVRP/GMRP
– DHCP snooping
– IP source guard
– Dynamic ARP inspection
– TACACS+
– LLDP
– LLDP-MED
– ISDP
– sFlow
– DoS
– Private group
– Protected port
– DHCP L2 relay
– MLD v1, v2 snooping
‡
•Layer 3 Services
– VLAN routing
– Port routing
– RIP v1/v2 (RFC 1058, 2453)
– OSPF v2/v3 (RFC 1583, 2328)
– OSPF equal-cost multi-path
(4 - ECMP routes)
– VRRP (RFC 2338, 2787) 64 instances
– Access control lists (ACL) - MAC, IP, TCP
– ACLs – 1,024 Global
– ACL over VLAN
– Dynamic ACL
– COS
– DiffServ QoS (RFC 2998)
– DNS Caching
– DHCP/BOOTP relay -primary and
backup (RFC 3046, option 82)
– ICMP throttling
– DHCP v4/v6 server
– Captive portal
– Auto VoIP
– IP Helper
– PIM-DM (RFC 3973)
‡
– PIM-SM (RFC 4601)
‡
– IGMP v2,v3
‡
– IGMP proxy
‡
– DVMRP (RFC 1075)
‡
– IPv6 unicast routing
‡
– Neighbor discovery
‡
– IPv6 tunnel
‡
– OSFPv3 (RFC 2740)
‡
– IPv6 PIM-SM
‡
– IPv6 PIM-DM
‡
– MLD (RFC 2710)
‡
– MLD proxy
‡
– DNSv6 (RFC 4472)
‡
•Switch Management Specifications
– SNMP v1, v2c, v3 with multiple
IP addresses
– RFC 1157, 1901-1910, 2574, 2575
– RFC 768 UDP
– UDP Relay
– RFC 854-859 telnet
– RFC 951 BOOTP
– RFC 1213 MIB II
– RFC 1757 RMON groups 1,2,3, and 9
– RFC 1215 SNMP traps
– RFC 1493 Bridge MIB
– RFC 1643 Ethernet Interface MIB
– RFC 1534 DHCP and BOOTP
interoperation
– RFC 2131, 2132 DHCP and BOOTP
– RFC 2865 RADIUS (both switch and
management access)
– RFC 2866 RADIUS accounting
– RFC 3580 VLAN assignment via
RADIUS (Dynamic VLAN)
– Private enterprise MIB
– Port mirroring support
– Flow-based mirroring
– RFC 2030 Simple Network Time
Protocol (SNTP)
– RFC 1027 Proxy ARP
– SYSLOG
– TFTP, SFTP, HTTP, SCP, or local USB flash
firmware upgrade
– RFC 1519 CIDR
– Proxy ARP
– DNS lookup
– Port description
– Auto install
– IPv6 management
– Dual image
‡
•Single IP Address Management
(firmware version 7.3 or higher)
– Manage up to 48 fully
managed switches
– Feature can be used with the
following models:
- FSM726E, FSM7226RS, FSM7250RS
- FSM7328S, FSM7352S, FSM7328PS,
FSM7352PS
- GSM7224R, GSM7248R
- GSM7328S, GSM7352S
Resilient Stacking:
GSM7328S
GSM7352S
ProSafe Dual Band
Access Point
Linked Aggregation
Internet
GSM7328SGSM7352S
Application Servers
Gigabit NICs
GA311
File Servers
Gigabit NICs
GA311
ModemProSafe VPN
Firewall 200
FVX538
Modem
Gigabit NICs GA311
Wireless Adapter
WAG5111
Wireless Adapter
WAG5111
**The features listed assume the switch is running 8.0 release or newer.
***IPv6 routing and IP multicast routing is available for v1 hardware with software license upgrade.
‡
v2 only
 previous