Filter
Top Products
November 2014
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered
trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries.
Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.
Set Up the Switch Configuration Utility
ProSAFE Click switches are plug and play and oer the same features
as ProSAFE Plus switches. You can install a configuration utility to select
additional options to manage and customize the switch for your network.
This utility is on the resource CD that was shipped with the switch.
Note: The configuration utility is installed on your computer and is supported only
on Windows.
¾ To install the configuration utility:
1. Insert the resource CD into a computer that is connected to the switch.
2. Click the Install ProSAFE Plus Utility link and follow the prompts to
install the program.
The switch configuration utility is installed in the program directory
of your computer and a ProSAFE Plus Utility icon is placed on your
desktop.
¾ To configure the switch:
1. Double-click the ProSAFE Plus Utility icon.
The configuration home screen displays a list of Plus switches that it
discovers on the local network.
2. Select the switch that you want to configure.
You are asked to enter the password for the switch.
3. Enter the switch’s password in the password field.
The switch’s default password is password.
4. Use the utility to configure the switch.
For a description of Plus features, see the ProSAFE Plus Switch
Configuration Utility User Guide. You can access the user guide through
links on the Help tab of the utility or on the resource CD.
Note: You can also access and configure the switch directly through its web-
based user interface by entering the switch’s IP address in the address bar of a
browser. If a DHCP server is not installed in your network, the default IP address is
192.168.0.239.
Specifications
Specification GSS108E GSS116E
Network interface RJ-45 connector for
10BASE-T,
100BASE-TX, or
1000BASE-T
RJ-45 connector for
10BASE-T,
100BASE-TX, or
1000BASE-T
Network cable Category 5e (Cat 5e) or better
Ethernet cable
Category 5e (Cat 5e) or better
Ethernet cable
Ethernet ports 8 16
USB ports
(provides power only)
2 -
USB power 10W maximum per port
15W maximum total
-
Power 100–240 VAC 50/60Hz, 1.0A
maximum
100–240 VAC 50/60Hz, 0.5A
maximum
Power consumption 20.14W maximum 8.36W maximum
Weight 0.43 kg (0.94 lb) 1.3 kg (2.64 lb)
Dimensions
(W x D x H)
305 mm x 65 mm x 36 mm
12 in. x 2.54 in. x 1.39 in.
407 mm x 70 mm x 36 mm
16.02 in. x 2.7 in. x 1.39 in
Operating
temperature
0–40°C (32–104°F) 0–40°C (32–104°F)
Operating humidity 0%–90% relative humidity,
noncondensing
0%–90% relative humidity,
noncondensing
Electromagnetic
compliance
CE Class B, FCC Class B, VCCI
Class B, RCM Class B
CE Class B, FCC Class B, VCCI
Class B, RCM Class B
Safety agency
approvals
CE mark, CB CE mark, CB
Support
Thank you for selecting NETGEAR products.
Aer installing your device, locate the serial number on the label of your
product and use it to register your product at https://my.netgear.com.
You must register your product before you can use NETGEAR telephone
support. NETGEAR recommends registering your product through the NETGEAR
website.
For product updates and web support, visit http://support.netgear.com.
NETGEAR recommends that you use only the ocial NETGEAR support
resources.
For the current EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.