NETGEAR JNR1010 Network Router User Manual


 
Table 1. Front panel LED descriptions
LED Description
Power
Solid green. Power is supplied to the router.
Off. Power is not supplied to the router.
WPS/
FastLane
WPS mode:
- Solid green. WPS mode is enabled.
- Off. WPS mode is disabled.
- Blinking green. WPS mode is available for connection.
FastLane mode:
- Solid green. FastLane mode is enabled.
- Off. FastLane mode is disabled.
Wireless
Blinking green. Data is being transmitted or received over the wireless link.
Off.
The wireless radio is turned off.
Internet
Solid green. The Internet connection has been established.
Blinking green.
There is traffic on the Internet port.
Off. No Internet connection.
Ethernet
(1, 2, 3, 4)
Solid green. The LAN port has detected an Ethernet link with a device such as a computer.
Blinking green. Data is being transmitted or received.
Off. No link is detected on this port.
Hardware Setup
9
N150 4-Port Wireless Router JNR1010
Side Panel
The router left side panel has the Wireless button and the WPS/FastLane button.
WPS/Fastlane button
Wireless button
For more information about WPS, see WPS Method on page 16. For more information about
the FastLane, see FastLane on page 29.