Filter
Top Products
Advanced Settings
74
N450 WiFi Cable Modem Router Model N450/CG3000Dv2
A login screen displays.
2. Enter the modem router user name and password.
The default user name is admin. The
default password is password. The user name and
password are case-sensitive.
The modem router main menu displays.
3. In the main menu, under
Advanced, select NTP.
The following screen displays:
4. Select the NTP enable check box.
5. Enter the IP server addresses:
a. Enter the first server IP address in the Server IP
Address 1 field.
b. Enter the second server IP address in the Server IP
Address 2 field.
c. Enter the third server IP address in the Server IP
Address 3 field.
6. Click the Apply button.
Your changes are saved.
Enable Network Address Translation
Network Address Translation (NAT) provides one-to-many translation of IP addresses
between devices. This means that your network presents only one IP address to the Internet,
and outside users cannot directly address any of your local computers. Enable NAT to allow
multiple computers on your network to access the Internet using a single public IP address.
NAT is enabled by default.