Filter
Top Products
Windows XP driver software 3-6
Moving the Network Card to a Different Slot
Windows XP automatically detects the installation and removal of hardware.
To move a GA302T Copper Gigabit Adapter to a different slot in the same
system, you need to do the following:
1. Shut down the system and remove the card from the PCI slot.
2. Install the card in its new PCI slot (see “Installing Your Gigabit Adapter” on page
2-7).
3. When the system is powered on, reinstall the driver software (see “Installing the
Driver Software” on page 5-1).
Removing the Driver Software
Under Windows XP, the driver software is automatically uninstalled when its
hardware is removed.To remove a card, do the following:
1. Shut down the system and remove the card from the PCI slot.
2. When the system is powered on, the driver will be automatically uninstalled.