Filter
Top Products
System Settings
177
ReadyNAS OS 6.1
3. From the pop-up menu that displays, select Settings.
A pop-up screen displays the settings for the selected Ethernet interface.
4. On the General tab, configure the settings as explained in the following table:
Item Description
Name Cannot be edited. Displays the name of the Ethernet interface.
Bandwidth (Mbps) Cannot be edited. Displays the bandwidth of the Ethernet interface.
MTU Enter the MTU in bytes. The default setting is 1500 bytes.
VLAN ID Enter a VLAN ID. The default setting ID is 0.
Note: If you use VLAN IDs, the switch to which you connect the ReadyNAS system
needs to support VLAN tagging.