NETGEAR READYNAS 4220 Switch User Manual


 
Backup and Recovery
245
ReadyNAS OS 6.1
A pop-up screen displays.
3. In the Name field, enter a name for the new backup job.
The name you choose can have a maximum of 255 characters.
4. From the Source drop-down list, select the backup source (the place where you store the
primary copy of your data).
5. From the Destination drop-down list, select a backup destination (the place where you want
to store the backed-up data).
Depending on how your ReadyNAS system is configured, these options vary.
Note: The source and destination of the job cannot both be remote.
6. Click the Create button.
The backup job is added to the list of jobs on the Backup screen.
7. Configure the backup job as described in Configure a Backup or Recovery Job on
page 248.
For more information about backup sources, destinations, and protocols, see Basic Data
Backup and Recovery Concepts on page 240.
Create a Recovery Job
The ReadyNAS system treats recovery jobs like backup jobs. You use the Backup screen to
create a recovery job. In a recovery job, you reverse the source and destination that you
used when you backed up the data. The recovery source is the backup destination and the
recovery destination is the backup source.
To create a recovery job:
1. Select Backup > Backups > Jobs.