Filter
Top Products
System Settings
185
ReadyNAS OS 6.1
The bond settings pop-up screen displays.
4. Configure the settings in the General tab as explained in the following table:
Item Description
Name Cannot be edited. Displays the name of the bonded adapter.
MTU Enter the MTU in bytes. The default setting is 1500 bytes.
VLAN ID Enter a VLAN ID. The default setting ID is 0.
5. Click the TCP/IP tab.
6. Configure the
TCP/IP settings as explained in the following table.
Note: If you use VLAN IDs, the switch to which you connect the ReadyNAS
system must support VLAN tagging.