Filter
Top Products
NETGEAR Wireless Router Setup Manual
2-2 Getting to Know Your NETGEAR Wireless Router
December 2004
The Front Panel
The front panel of the wireless router includes various status lights.
You can use the status lights to verify connections.
The Rear Panel
The rear panel of the WGM124 router contains the items listed below.
• AC power adapter outlet
• Four LAN ports
• Internet (WAN) Ethernet port for connecting the router to a cable or DSL modem
• Factory default reset push button for Restoring the Default Configuration and Password
• One red status LED, which blinks when the default reset button is pushed.
• Three wireless antennae
Table 2-1. Status Light Descriptions
Label Activity Description
Power On Green Solid
Amber Blink
Off
Power is supplied to the router.
Power is supplied to the router and it is performing its diagnostic test.
Power is not supplied to the router.
WLAN On The WLAN wireless interface is enabled.
Link/ACT On
Blink
The router has detected a link with an attached device.
Data is being transmitted or received by the router.
LAN Green
Amber
The LAN port has detected a 100 Mbps link with an attached device.
The LAN port has detected a 100 Mbps link with an attached device.