NETGEAR WNDA3100v3 Webcam User Manual


  Open as PDF
of 2
 
October 2014
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered
trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries.
Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.
6. Return to the NETGEAR genie screen and click the Next button.
NETGEAR genie displays a list of WiFi networks in your area.
Install Windows Standalone Driver
For Windows 8.1, Windows 8, Windows 7, and Windows Vista, you can
install the Windows standalone driver without NETGEAR genie and use
the Windows WLAN Autoconfig service to join a WiFi network. If you use
Windows XP, you can install the Windows standalone driver and use the
Wireless Zero Configuration service to join a WiFi network.
1. Insert the resource CD in your computer CD drive.
Note: If your computer does not include a CD drive, download the
WNDA3100v3 resource CD driver by visiting
http://support.netgear.com. Click the Support For Home button and
enter WNDA3100v3 in the search field.
If the Resource CD screen does not display, browse the files on the CD
and double-click the Autorun.exe file.
The NETGEAR Resource CD screen displays.
2. Click the Install Windows Standalone Driver button.
The driver installs on your computer.
3. When prompted, insert the adapter into a USB port on your computer.
Join a WiFi Network
You can join a WiFi network from NETGEAR genie, or you can use Wi-Fi
Protected Setup (WPS) if your WiFi router supports it.
Join a Network Using NETGEAR genie
1. Insert the adapter into a USB port on your computer.
2. Click the adapter’s NETGEAR genie icon
that displays on the
Windows systems tray or on the desktop.
The NETGEAR genie Home screen displays.
3. Click the Join a Network button.
4. Select a WiFi network.
5. Click the Connect button.
6. If the network is secure, enter its password or network key.
The adapter joins the network, which can take a few minutes. Your
settings are saved in a profile.
The adapter LED lights amber for a 2.4 GHz WiFi connection and blue
for a 5 GHz WiFi connection.
Join a Network Using WPS
1. Press and hold the WPS button on the adapter for two seconds.
The adapter LED blinks.
2. Within two minutes, press the WPS button on your WiFi router or
gateway.
The adapter joins the network, which can take a few minutes. Your
settings are saved in a profile.
The adapter LED lights amber for a 2.4 GHz WiFi connection and blue
for a 5 GHz WiFi connection.
Check Your Connection Status
When you install your adapter, the adapter’s NETGEAR genie icon displays in
the Windows system tray and on the desktop. You can double-click this icon to
open NETGEAR genie to make changes or connect to a dierent WiFi network.
The color of the icon indicates the strength of your WiFi connection:
White. Strong connection
Yellow. Weak connection
Red. No connection
If you remove your adapter, NETGEAR genie is not available, so the icon does
not display. When you insert the adapter again, the icon returns.
Support
Thank you for purchasing this NETGEAR product. Aer installing your device,
locate the serial number on the label of your product and use it to register your
product at https://my.netgear.com.
You must register your product before you can use NETGEAR telephone
support. NETGEAR recommends registering your product through the NETGEAR
website.
For product updates and web support, visit http://support.netgear.com.
NETGEAR recommends that you use only the ocial NETGEAR support
resources.
You can get the user manual online at http://downloadcenter.netgear.com or
through a link in the product’s user interface.
For the complete EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
WPS button
 previous