Filter
Top Products
Getting to Know Your Wireless Router 3
Front Panel
The front panel has nine status lights that you can use to monitor and verify various conditions.
There are also two switch buttons on the right (or at the bottom if the router is in its stand). The
status lights are described in Table 1, and the switch buttons in Table 2.
Figure 2
Table 1. Status Light Descriptions
Item Function Activity Description
1.
Power/Test Solid Amber The unit is starting up after being powered on.
Solid Green The unit startup has completed; the unit is ready.
Blinking Green Firmware is corrupted. See “Checking Basic Router Functions” on
page 27 for instructions on restoring your router firmware.
Blinking Amber
1. Firmware is upgrading.
2. Restore factory settings button pressed; restoring factory default
settings.
Off Power is not supplied to the router.
2.
2.4 GHz
Mode
Off The 11n mode at 2.4 GHz is off.
Solid Green The unit is operating in 11n mode at 2.4 GHz.
Blinking Green Data is being communicated over a wireless network.
3.
5 GHz
Mode
Off The 11n mode at 5 GHz is off.
Solid Blue The unit is operating in 11n mode at 5 GHz.
Blinking Blue Data is being communicated over the wireless network.
1
2
3
4
5
6
7
8