NETGEAR XAVB1601-100NAS Network Hardware User Manual


 
Safety Information:
AC input:100–125V, 0.1A (Max: NA) and 200–250V, 0.1A (Max;
others), for product only.
Operating temperature: 0–40°C
The socket-outlet shall be installed near the equipment and shall be
easily accessible.
XAV1601 ratings (maximum load):
Only power cords are allowed to be inserted into the filtered AC
outlet; no other equipment with a direct plug-in is allowed. The
power cord needs to be a maximum of 1m long and a minimum of
0.75 mm square of cross-sectional area.
Do not plug devices into the XAV1601 filtered AC outlet that exceed
the product ratings.The output voltage of the filtered AC outlet is the
same as the power outlet into which the XAV1601 is plugged. To
help avoid damaging your system, be sure that the attached devices
are electrically rated to operate with the power available in your
location.
If the input AC voltage is less than 125 Vac, the device plugged into
the filtered AC socket of the XAV1601 might not perform as well as
expected.
DO NOT PLUG MAJOR HOME APPLIANCES into the filtered AC
socket or into an attached powerstrip. The device is not intended to
be used with home appliances such as air conditioners, power tools,
space heaters, fans, hair dryers, ovens, or refrigerators.
Check the electrical current for any appliance used with the device,
and do not exceed home and product outlet ratings and electrical
requirements.
EU: 16A 250V UK: 13A 250V NA: 12A 125V