Filter
Top Products
Easy Setup 6-5
2. Easy Setup Profile
The Easy Setup Profile screen is where you configure the parameters that control the Netopia
3347W/3357W-ENT’s connection to a specific remote destination, usually your ISP or a corporate site.
On a Netopia 3347W/3357W-ENT you can add up to 15 more connection profiles, for a total of 16, although
you can only use one at a time, unless you are using Virtual Private Networks (VPNs).
Note: The appearance of this screen varies, depending on the settings in the previous screen.
1. To enable address translation, toggle Address Translation Enabled to Yes (the default). For more
information on Network Address Translation, see the Firmware User’s Guide chapter on “Multiple Network
Address Translation (MultiNAT)“.
2. From the IP Addressing menu item, choose between Unnumbered and Numbered addressing. Numbered is
the default for ADSL. It assigns a unique IP address to the ADSL WAN interface, as required by most ISPs’
routers. Unnumbered may be used for simpler configurations such as point-to-point applications.
If you selected Numbered,
• Select the editable field labeled Local WAN IP Address.
The default address is 0.0.0.0, which allows for dynamic addressing, when your ISP assigns an address
using DHCP or PPPoE. However, you can enter another specific address if you want to use static
addressing. In that case, enter the local WAN address your ISP gave you. Press Return.
• Select the editable field labeled Local WAN IP Mask. Enter the mask address your ISP gave you or leave
0.0.0.0 when using DHCP or PPPoE. Press Return.
If you selected Unnumbered, the following fields appear:
• Select the editable field labeled Remote IP Address and enter the remote IP address. Press Return.
• Select the editable field labeled Remote IP Mask and enter the remote mask address. Press Return.
Connection Profile 1: Easy Setup Profile
Connection Profile Name: Easy Setup Profile
Address Translation Enabled: Yes
IP Addressing... Numbered
Local WAN IP Address: 0.0.0.0
Local WAN IP Mask: 0.0.0.0
Remote IP Address: 0.0.0.0
Remote IP Mask: 0.0.0.0
PPP Authentication... None
PREVIOUS SCREEN NEXT SCREEN