Filter
Top Products
6-2 Getting Started Guide
Quick Easy Setup Connection Path
This section may be all you need to do to configure your Netopia 3387W-ENT Cable/DSL Wireless Router. Your
service provider will supply you with several parameter values. Below is a handy checklist:
WAN Ethernet Configuration Screen
Enable PPP over Ethernet ❑ Off (default) or
❑ On
Address Translation
Enabled:
(if PPPoE is not enabled)
❑ Yes (default) or
❑ No
Local WAN IP Address
_______________________
(0.0.0.0 is default)
Local WAN IP Mask:
(if Local WAN IP Address is other
than 0.0.0.0)
_______________________
Easy Setup Profile Screen (only if PPPoE is enabled)
Address Translation
Enabled:
❑ Yes (default) or
❑ No
IP Addressing ❑ Unnumbered (default)
❑ Numbered
Remote IP Address: _______________________
(127.0.0.2 is default)
Remote IP Mask: _______________________
(255.255.255.255 is default)
PPP Authentication ❑ PAP (default) or
❑ CHAP
❑ None
PAP User Name/
CHAP Host Name: _______________________
PAP Password/
CHAP Secret: _______________________
Local WAN IP Address:
(Numbered IP addressing
only)
_______________________
(0.0.0.0 is default)
Local WAN IP Mask:
(Numbered IP addressing only) _______________________
IP Easy Setup Screen
Ethernet IP Address:
Ethernet Subnet Mask:
_______________________
_______________________
(192.168.1.1 default)
(255.255.255.0 default)
Domain Name: _______________________
Primary Domain Name
Server: _______________________
Secondary Domain Name
Server: _______________________
Default IP Gateway: _______________________
IP Address Serving:
❑ On (default) or
❑ Off
Number of Client IP
Addresses:
_______________________
(100 is default)
1st Client Address: _______________________
(192.168.1.100 is default)
Easy Setup Security Configuration Screen
Write Access Name: _______________________ Write Access Password: _______________________