6-4 Getting Started Guide
❑ RFC1483
or
RFC1483 Mode:
❑ Bridged 1483 (default) or
❑ Routed 1483
(for Bridged 1483 only)
PPP over Ethernet (PPPoE)
❑ Off (default) or
❑ On
❑ HDLC
Data Circuit
(ATM Operation Mode only)
VPI (0-255):
(default is 0)
VCI (32-65535):
(default is 35)
_______________________
_______________________
Easy Setup Profile Screen
Address Translation
Enabled:
❑ Yes (default) or
❑ No
IP Addressing: ❑ Numbered (default) or
❑ Unnumbered
(for Numbered IP Addressing)
Local WAN IP Address:
_______________________
Local WAN IP Mask:
_______________________
(for Unnumbered IP Addressing)
Remote IP Address:
_______________________
Remote IP Mask:
_______________________
(for Frame Relay DLEs only)
Frame Relay Management
Type:
❑ ANSI (Annex D)
❑ CCITT (Annex A)
❑ LMI
❑ None
(for PPP DLEs only)
PPP Authentication:
❑ None (default),
❑ PAP or
❑ CHAP
(for PAP or CHAP)
User Name (or Host Name):
_______________________
(for PAP or CHAP)
Password (or Secret):
_______________________
IP Easy Setup Screen
Ethernet IP Address:
Ethernet Subnet Mask:
_______________________
_______________________
(192.168.1.1
255.255.255.0
are defaults)
Domain Name: _______________________
Primary Domain Name
Server:
_______________________
Secondary Domain Name
Server:
_______________________
Default IP Gateway: _______________________
Easy Setup Security Configuration Screen
Write Access Name: _______________________
Write Access Password: _______________________