Filter
Top Products
4
(Rear View)
CAT5 Cable
to Matrix Switch
Cable to CPU
3. Connect a CAT5 cable from the "OUT" port on each Host Adapter to a "CAT5" port on the PRIMUX KVM
Matrix Switch.
4. Connect the Terminating Plug (supplied with Host Adapter) to the "IN" port on each Host Adapter.
WARNING: Never connect the PRIMUX Host Adapter, User Station, or Matrix
Switch to an Ethernet card, Ethernet router, hub or switch or other Ethernet
RJ45 connector of an Ethernet device. Damage to devices connected to
the Ethernet may result.
NOTE: HA-SUN-MTX Host Adapters require the insertion of a Terminating Plug (included) into the "IN" port on the Host Adapter.
Be sure to insert this plug.
5. Connect the user keyboard and mouse to the proper "DEVICES" port(s) (USB or PS/2) on the PRIMUX-UZR User Station. (USB type
devices are shown in the following image.)
6. Connect the user monitor to the "MONITOR" port on the User Station.
!
Cat5
Monitor
SUN
Devices
PS/2
Devices
Mouse
Kybd
RS232
USB
Devices
5VDC
2A
NETWORK
TECHNOLOGIES
INCORPORATED
Tel:330-562-7070
Fax:330-562-1999
1275 Danner Dr
Aurora, OH 44202
www.networktechinc.com
NTI
R
+
Rear View of PRIMUX-UZR User Station
Rear View of PRIMUX-UZR User Station
VGA
Multi-Scan
Monitor
USB
Mouse
USB Keyboard
(Rear View)
CAT5 Cable
to PRIMUX Switch
Cable to CPU
Terminating
Plug (Supplied)