Filter
Top Products
NTI BRANDNAME AND DESCRIPTON
4
CPU Connection
1.
Connect the male USB type A connector end of the USB-AB-1M-ST cable into the device port on the CPU.
2.
Connect the male USB type B connector of the same cable to the "CPU" port on the VOPEX.
3.
Connect the male 15HD connector end of the VEXT-3 into the CPU’s video port. (See Fig. 2)
4.
Connect the female 15HD connector end of the VEXT-3 into the "VIDEO" port on the VOPEX.
Figure 2- Connect the VOPEX to the CPU
Hub Ports
If desired, connect additional USB devices to
the each of the three "Hub Ports" . These ports
will be powered and operate anytime the VOPEX
and CPU are powered ON. See Fig. 3.
Power-Up
If not already ON, turn ON power to the CPU
monitors, and VOPEX.
Figure 3- Connect other devices to Ports 2-4
Rear View of VOPEX-USBV-2
5VDC
2A
-
+
CPU
USER 1
DEVICES
MONITOR 1
VIDEO
USER 2
DEVICES
NTI
Tel:330-562-7070
Fax:330-562-1999
1275 Danner Dr
Auro ra, O H 4420 2
www.nti1.com
MONITOR 2
DEVICE 3 DEVICE 2 DEVICE 1
HUB PORTS
Scanner
AC
Adapter
ADAPTER
Printer
USB Camera
15HD Male
Video Connector
15HD Female
Video Connector
Rear View of VOPEX-USBV-2
5VDC
2A
-
+
CPU
USER 1
DEVICES
MONITOR 1
VIDEO
USER 2
DEVICES
NTI
Tel:3 30-562-7070
Fax:330-562-1999
1275 Danner Dr
Aurora, OH 44202
www.nti1.com
MONITOR 2
DEVICE 3 DEVICE 2 DEVICE 1
HUB PORTS
USB Type B
Female Connector
USB Type A Female
USB Type A Male
VEXT-3
15HD Male
Video Connector
USB Type B
Male
15HD Female
Video Connector
Rear View of Windows USB CPU
Video Port
Input Device Port
VIDEO
USB-AB-1M