Filter
Top Products
RFT2 Rack Kit Installation Guide
07/01/06 Rev 1.0 Page 5 of 13
Step Detail
6. Attach the left slide rail assembly to the rack
mounting rail by using (4) #10-32 x ” screws for the
front and rear slide mounting brackets.
7. Repeat for the right slide rail assembly.
8. Extend the slides from the rack.
9. Install the LCD/keyboard assembly into the rack. Lift
the tray assembly and approach the rack with the
rear of the tray facing the rack enclosure. Align the
tray assembly with the slide rails in the rack.
Carefully assemble the two slide members together.
Push the tray assembly in until the slides latch
together. Release the lock mechanisms as shown in
step 3 in order to slide the tray assembly completely
closed.
You are now ready to install the Cable Management
System. See next page.