Filter
Top Products
17 inch LCD/Keyboard Rack Kit Installation Guide
Connecting your LCD/Keyboard
Step Detail
! Note: Before connecting the LCD monitor/keyboard to a
KVM or Sun System, all systems should be turned off.
1. The keyboard and trackball’s design allows its use with
most Sun systems. The LCD-17-8P com es with an 8-
pin Din keyboard connector, while the LCD-17-USB
comes with a USB style connector.
2. The monitor uses a standard HD-15 male video
connector. If your Sun system uses a DB13W3
connection, you can use a Sun adapter to interface
between the LCD connector and the Sun system. (PN:
X3872A)
3. Connect the monitor to a power source. The LCD
Monitor’s power supply is auto ranging, and will operate
on AC voltages ranging from 90-264 and 50-60 Hz. The
monitor uses an IEC 320-C14 connector. An adapter will
be required to interface with other connector types.
4. Secure the cables to ensure they will not bind when
operating the LCD/keyboard slide mechanism. Cycle the
tray in and out of the cabinet to ensure there is enough
of a service loop in the cables.
Page 6 of 14