Nexstar 3 Computer Drive User Manual


 
Once formatted, the NexStar 3 SuperSpeed is ready for use.
OK
10.
Una vez formateada la unidad, el dispositivo NexStar 3 SuperSpeed
quedará listo para su uso.
Une fois formaté, le NexStar 3 SuperSpeed sera prêt à être utilisé.
Sobald der NexStar 3 SuperSpeed formatiert ist, kann er benutzt werden.
Una volta formattato, NexStar 3 SuperSpeed è pronto per l'uso.
將硬碟格式化後,即可使用 NexStar 3 SuperSpeed。
The operating system should detect the hard drive. Proceed with the
necessary setup procedure to format the hard drive.
?
9.
El sistema operativo detectará la unidad de disco duro. Lleve a cabo el
proceso de configuración necesario para formatear la unidad de disco
duro.
Le système d’exploitation doit détecter le disque dur. Effectuez les
réglages nécessaires pour formater le disque dur.
Das Betriebssystem sollte die Festplatte erkennen. Nehmen Sie die
erforderlichen Schritte zur Einrichtung der Festplatte vor, um sie zu
formatieren.
Il sistema operativo deve rilevare il disco rigido. Procedere con la
procedura di configurazione necessaria per la formattazione del disco
rigido.
作業系統應能偵測到硬碟。請繼續必須執行的安裝程序,並格式化硬碟。
Connect the USB cable. (Power will be drawn from the
USB port and provide power to the hard drive)
6. 7.
Use los tornillos de color negro suministrados para
sujetar el soporte a la carcasa.
Utilisez les vis noires fournies pour attacher le chariot
sur le cadre.
Befestigen Sie den Laufwerkträger mit den
mitgelieferten schwarzen Schrauben an dem Gehäuse.
Usare le viti nere in dotazione e stringere il supporto al
vano.
使用隨附的黑色螺絲鎖緊外接盒與機殼。
Conecte el cable USB. (El puerto USB suministrará
energía al dispositivo y éste a la unidad de disco duro).
Branchez le câble USB (le courant passera par le port
USB et alimentera le disque dur)
Schließen Sie das USB-Kabel an. (Die Festplatte wird
über den USB-Anschluss mit Strom versorgt)
Connettere il cavo USB. (L’alimentazione può essere
assorbita dalla porta USB per alimentare il disco rigido)
連接 USB 線(由 USB 埠供應硬碟電源)。
Copyright © 2010 Vantec Thermal Technologies. All Right Reserved. | All Registered Trademarks Belong To Their Respective Companies.
Model: NST-280S3
Information in this document is subject to change without notice.
Reproduction of these materials in any manner whatsoever without written permission is strictly forbidden.
Printed in China
Printed on Recycled Paper.
NOTE:
NOTE: New hard
drives needs to be
initialized and
partitioned before it
will appear in
Windows Explorer or
Mac desktop. Please
refer to “Creating a
New Partition” within
the manual.
Nota: Si la unidad de
disco duro es nueva,
deberá inicializarla y
particionarla para que
aparezca en el
Explorador de Windows
o en el escritorio de Mac.
Consulte la sección
“Crear una partición
nueva” en el manual.
Remarque : Les
nouveaux disques durs
doivent être initialisés et
partitionnés avant
d’apparaître dans
Windows Explorer ou
Mac desktop. Veuillez
consulter le chapitre
“Créer une nouvelle
partition” de ce manuel.
Hinweis: Eine neue
Festplatte muss
initialisiert und partitioniert
werden, bevor sie im
Windows Explorer oder
auf dem Mac-Desktop
erscheint. Lesen Sie
hierzu bitte “Erstellen
einer neuen Partition” in
diesem Handbuch.
Nota: I nuovi dischi
rigidi devono essere
inizializzati e
partizionati prima che
appaiano nel desktop
di Windows Explorer o
Mac. Fare riferimento
a "Creazione di una
nuova partizione" nel
manuale.
:
Windows Explorer
Mac
備註:新硬碟需要經過初始
化與分割,才能顯示於
Windows Explorer 或 Mac
桌面。詳細資訊請參閱手冊
中的「建立新硬碟分割」。
Use the provide black screws and fasten the caddy to
the enclosure.
USB 3.0 Cable
Optional USB 3.0
Y-Cable for Extra Power
(6)
(6)
(7)