Filter
Top Products
SERVER
Note: If the cable must be cut, it is recommended it is cut at the
unmarked cable end, since a marked cable is easier to identify.
When all connections are made, use the cable straps as required.
Mount the Server cover using the 2 mounting screws.
Your Server installation is done!
2.3 Installing the transducers
Log, depth, wind and compass transducers are all connected to
the pins on the right hand side of the Server. They are all clearly
colour coded and marked with numbers and names. Install the
transducers according to the separate instructions supplied with
each transducer. Connect as per below drawings
9