Filter
Top Products
SPEAKER PLACEMENT:
SYSTEM OPERATION:
A-20 MONITOR SYSTEM CARE:
NEED HELP?
The A-20 Monitor System is intended to provide consistent performance over a wide range of placement situations.
This is accomplished through the use of electrical controls, wide dispersion drivers, advanced enclosure design and
carefully chosen crossover characteristics. Nevertheless, it is always worth investing time and effort experimenting
with optimum loudspeaker placement. In all cases, A-20 Monitors should be set up symmetrically equidistant from
the listening position; the left speaker and right speaker should be at the same relative positions with respect to the
primary listening area. This is important in order the hear a proper stereo sound stage. The speaker baffles angle in
towards the listening position with the loudspeaker backs parallel to one another. A good starting point can be
found in Figure 8 below. Ideally, the tweeter height should be on axis with your ears, or slightly above. Also,
remember that nearby reflective surfaces can alter impulse response, blur imaging and change tonality.
The A-20 is capable of very high output levels, especially when listening in the near-field. Protect your ears and use common
sense. Still, every speaker system has itslimits. Harsh breakup at extremelyhigh volume, or heat emanating from thedrivers is
an indication that the system has exceeded its output limits and you should lower the playback level. Watch for excessive
lighting of the front panel overload indicator on the Control Amplifier. Speaker damage most often occurs from sustained
high volume levels, notfrom transient sounds or brief musical peaks.
Except for the occasional flattering comment, your A-20System needs no regular maintenance. Never attempt to clean the A-
20 monitor driver units except for very light feather dusting. The A-20 monitor cabinets and the A-20 Control
Amplifier front panel can be cleaned using a damp, soft cotton cloth first sprayed with a mild, non-abrasive glass
cleaner. Never spray the speaker or amplifier directly! Avoid silicone and oil based cleaners or treatments.
Technical Support can be reached several ways: Telephone us (800)-NHT-9993 (648-9993), E-mail us at:
tech@nhtpro.com, Fax us at: (707) 747-1252 or write us at: NHTPro, 6400 Goodyear Rd., Benicia, CA 94510. Or visit
our world wide web site at www.nhtpro.com.
Listening Position
D x 1.5
D
Fig. 8 Ideal Monitor Placement