Filter
Top Products
Nikon
ScanTouch 110 User's Manual 19
4.3 Connecting the SCSI Cable
Before connecting the SCSI cable, confirm that all SCSI devices,
including the computer system, have been turned off.
Power OFF
Connect the unit to the computer using the provided SCSI cable. After
attaching the connector, be sure to lock it in place. You can connect the
SCSI cable to either of the SCSI connectors (50-pin and 25-pin) on the
rear panel of the unit.
Caution: Do not touch the pins of the SCSI connector. This can
result in static damage.
4. Connecting the Scanner