Filter
Top Products
©
2006 Nokia. All rights reserved. 5
Switch the gateway on or off
To switch on, plug the charger cable into
the power connector at the back, and
connect the charger to a wall outlet.
When the gateway is connected to a
paired audio device and is ready for use,
the indicator light flashes slowly. The
gateway tries to connect to the Bluetooth
device that you have used most recently
in the current operating mode. For more
information on the two operating modes,
see “Pair the gateway”.
To switch off, unplug the charger from the
wall outlet and the gateway.
Pair the gateway
Before you can use the gateway with a
compatible audio device that supports
Bluetooth wireless technology, you need
to pair the gateway with it.
To pair the gateway with a music player
(such as a music player device or a mobile
phone with a music player feature), do as
follows:
1. Check that the operating mode key is
in the down position. If it is not, press
the key.
2. Press and hold the pairing key until
the indicator light is continuously
shown.
3. Use your music player or phone to
search for and select the gateway and
to enter the Bluetooth passcode 0000.
If the pairing was successful, the
indicator light flashes quickly 10
times.
To pair the gateway with a headset, do as
follows:
1. Check that the operating mode key is
in the up position. If it is not, press the
key.
2. Set up the headset for pairing as
instructed in the user guide for the
headset.