Filter
Top Products
Getting started
9
Copyright
© 2003 Nokia. All rights reserved.
Pairing multiple headsets
To pair another headset to the adapter, just repeat the procedure above. However,
make first sure that the headset that has already been paired is turned off, and
that only the new unpaired headset is within a 10 metre range of the adapter.
Note that the adapter can be simultaneously paired with two headsets only.
When using the headsets, the adapter first tries to find the default user, which is
the first paired headset, and then the secondary headset. If you want to pair more
headsets, the new headset replaces the secondary user. You can replace the
secondary user as many times as you want. If you want to replace the default user,
you need to reset the adapter. Note that since the reset clears the memory of the
adapter, the secondary user is reset as well.
■ Resetting headsets
Reset clears all pairing and user data information. To reset the adapter, press and
hold the Control key for 10 seconds. The reset is confirmed with an alternating
red and green blink for another 10 seconds.
Your headset may accept only a limited number of pairings and may need to be
reset to make the pairings. For resetting your headset, refer to the user guide for
the headset.
■ Switching the Nokia wireless audio adapter off
You can also switch the adapter off, if for instance the adapter will not be used
for a while. If you want to switch the adapter off, press the Control key for 2