Filter
Top Products
E Copyright Nokia Networks Oy
C33874002SE_A0
9
3 Configuring M5122
Your service provider has configured your M5122 for the service. Do
not change settings unless specifically asked by your service
provider. You can change M5122 settings with an ordinary web
browser, such as Microsoft Internet Explorer or Netscape Navigator.
Use a PC connected to an ETH port of M5122 for configuration. In this
case the corresponding ETH indicator should be lit.
3.1 Browser management
The web configuration pages of M5122 can be accessed through the
Ethernet and through the ADSL/ATM channels of M5122. In order to
access the web management feature, the IP functionality must be
activated and an IP address must be given to the corresponding
interface.
You can use your PC’s web browser software to access the web
configuration pages in M5122. To access the web pages you must
know the IP address of your M5122 or, alternatively, the “name” that
your M5122 recognises.
Note
Before using your web browser for configuration, you must know the
IP address or the name assigned to your M5122.
There are three ways to find out whether to use a name or an IP address:
D Your service provider has given you an IP address for M5122.
D Your M5122 uses Dynamic Host Configuration Protocol (DHCP)
and Domain Name Server. In this case the name is M5122.
D Your M5122 uses DHCP. In this case run winipcfg.exe (Windows
95) or ipconfig.exe (Windows NT). The IP address of M5122 is the
Default Gateway address shown by the ipconfig program.
3.1.1 Opening a connection
To open a connection to the Nokia M5122:
1. Start your web browser.