Filter
Top Products
TROUBLESHOOTING AND ROUTINE MAINTENANCE 13 - 23
10
If the ink cartridge you installed is not a brand new one, please
be sure to press
2
.
—OR—
For each
new
cartridge, press
1
on the dial pad to automatically
reset the ink dot counter for that colour. (The ink dot counter
enables the machine to notify you when a colour is running low.)
The machine will enter a cleaning cycle for approximately 3
minutes for each replaced cartridge. The LCD alternately shows
Cleaning
and
Please Wait
.
When the machine completes the cleaning cycle, the LCD
returns to Standby mode condition.
WARNI NG
If ink gets in your eyes, irrigate them with water immediately and call
a doctor if you are concerned.
Caution
■
DO NOT remove ink cartridges if you do not need to replace
them. If you do so, it may reduce the ink quantity and the printer
will not know the quantity of ink left in the cartridge.
■
DO NOT shake the ink cartridges, because the ink may spill when
you take off the sealing tape.
■
If ink stains your body or clothing, wash with soap or detergent
immediately.
■
If you install an ink cartridge in the wrong colour position, you
must clean the print head several times before you start printing
(after correcting the cartridge installation) because the colours
were mixed.
■
Once you open an ink cartridge, install it in the machine and use
it up within six months of installation. Use unopened ink
cartridges by the expiration date written on the cartridge
package.