Filter
Top Products
Chapter 3 Using the console interface 93
Using the BayStack 420 10/100/1000 Switch
Reset to Default
Settings
Resets the switch to the factory default configuration settings. This option is
followed by a screen prompt that precedes the action. Enter Yes to reset the
switch to the factory default configuration settings; enter No to abort the option:
• If the switch is participating in a stack configuration, you can reset the entire
stack.
• When you select this option, the switch resets, runs a self-test, then displays
the Nortel Networks logo screen. Press [Ctrl]-Y to access the BayStack 420
Switch main menu.
Caution: If you choose the Reset to Default Settings option, all of your
configured settings will be replaced with factory default settings when
you press [Enter]
Achtung: Bei Auswahl des Befehls zur Rücksetzung auf die
Standardeinstellungen werden alle von Ihnen konfigurierten
Einstellungen durch die werkseitigen Standardeinstellungen ersetzt,
wenn Sie die Eingabetaste drücken.
Attention: Si vous restaurez la configuration usine, votre configuration
courante sera remplacée par la configuration usine dès que vous
appuierez sur [Entrée].
Precaución: Si selecciona el comando Restaurar valores
predeterminados, todos los valores de configuración se sustituirán por
las valores predeterminados en fábrica al pulsar [Intro].
Attenzione: Nel caso in cui si selezioni la reimpostazione dei valori di
default, tutte le impostazioni configurate verranno sostituite dai default di
fabbrica premendo il tasto [Invio].
Logout Allows a user in a Telnet session or a user working at a password-protected
console terminal to terminate the session.
Table 9 Console interface main menu options (continued)
Option Description