Filter
Top Products
Alteon OS 21.0 BBI Quick Guide
Chapter 2: Browser-Based Interface Basics
17
24R9744, March 2006
Commands
The following general commands are available on the toolbar:
Apply Pending configuration changes do not take effect until the Apply command is
selected. Once applied, all changes take effect on the switch immediately. If
you do not save the changes, however, they will be lost the next time the
switch is rebooted.
Save Writes applied configuration changes to non-volatile flash memory on the
switch.
Revert Remove pending configuration changes between “apply” commands. Use this
command to restore configuration parameters set since last “apply” command.
Diff Show any pending configuration changes.
Dump Dump the current switch configuration to a script file.
DumpBk Dump the backup configuration to a script file.
DumpAc Dump the active configuration to a script file.
Show Log Opens a new Web-browser window for displaying the 64 most recent switch
log messages. Close the log browser when finished.
Help Opens a new Web-browser window for displaying the basic online help infor-
mation. Close the help browser when finished.
Logout Log off the switch and exit the BBI.