29
Setting Up the BayStack Instant Internet 400-S Unit
Chapter 2
Installation preparation
This chapter describes the steps you should follow in preparing for Internet
access, explains some decisions you need to make before you install your Instant
Internet 400-S unit, and provides an installation checklist and worksheet.
Preparing for Internet access
To prepare for access to the Internet:
1 Obtain installation and service from your local telephone company (telco).
2 Obtain an Internet connection from an Internet service provider (ISP).
3 Connect the Instant Internet unit to your local area network (LAN).
4 Obtain the power cord from the Instant Internet packaging.
Refer to “Instant Internet quick installation” on page 43 for more information.
Note: Do not apply power to the Instant Internet unit until you have
completed the installation steps in the procedure “Instant Internet quick
installation” on page 43.