Filter
Top Products
Filters and QoS Configuration for ERS 5500
Technical Configuration Guide v2.0 NN48500-559
___________________________________________________________________________________________________________________________
Nortel Confidential Information Copyright © 2008 Nortel Networks. All Rights Reserved.
External Distribution
29
Id: 55004
Policy Name: host
State: Enabled
Classifier Type: Classifier
Classifier Name: host
Classifier Id: 55005
Unit/Port: 1/19
Meter:
Meter Id:
In-Profile Action: host
In-Profile Action Id: 55005
Non-Match Action: Drop_Traffic
Non-Match Action Id: 1
Track Statistics: Aggregate
Precedence: 11
Session Id: 0
Storage Type: Other
7.1.4.3 Changing ACL
Assuming we wish to change the http marking from CoS level of Gold to CoS level of Bronze,
enter the following command shown below.
From using the show command above, we know that port 1/19 as been assigned ACL-Assign ID
of 1. Hence, we need to remove this id first using the following command:
• 5500(config)#no qos acl-assign 1
or if you wish to remove the setting on an individual port; we only used one port for this example,
so either command can be used.
• 5500(config)#no qos acl-assign 1 port 1/19
Next, we need to delete IP-ACL id 2:
• 5500(config)#no qos ip-acl 2
Next, we need to create a new IP-ACL with the new filter criteria:
• 5500 (config)#qos ip-acl name host src-ip 172.1.1.10/32 protocol 6 src-port-min 80
src-port-max 80 update-dscp 10 block tcpcommon
Finally, re-apply the IP-ACL back to port 1/19:
• 5500 (config)#qos acl-assign port 1/19 acl-type ip name host