Nortel Networks 56K Modem User Manual


 
YML5067 NetComm Roadster Series 56K USB Modem5067 NetComm Roadster Series 56K USB Modem NetComm Roadster Series 56K USB ModemNetComm Roadster Series 56K USB Modem
www.netcomm.com.au 5
NetComm Roadster Series 56K USB Modem
TIA/EIA 578 Class 1 FAX send and receive speeds of 14400, 12000, 9600, 7200, 4800 or 2400bps.
VOICE/ Audio Mode
TAM through the microphone / speaker interface on Audio Sound card
ERROR Correction
Support V.42 LAMP, MNP 2-4
DATA Compression
Support V.44,V.42bis and MNP 5
DAA Line interface Capabilities
DTMF Tone Dial/ accurate make-break ratio Pulse Dial
Proprietary transformer-based isolation barrier
Programmable even detect for Caller-ID reception and Power Ring detection
Programmable AC/DC impedance termination for Return-Loss / Specic Countries homologations
FLOW Control
Both transmit and receive fax data are buffered. Data transmission over DTE is ow controlled by XON/XOFF and RTS/CTS.
System Requirements
Computer with Pentium 200 MMX or higher processor.
Windows 98/98SE/ME/2000/XP/Vista or 7 Operating System.
20 MB Hard Disk free space or above
Sound card for voice features
1 available USB port.
CD-ROM drive.
Package Includes
The box contains the following items:
One 56Kbps USB Modem
One RJ11 Phone Line Cable
One USB cable
One Utility CD with Drivers and User Manual
One Quick Installation Guide
If any of these items are missing or damaged, please contact your dealer or sales representative for assistance.