Filter
Top Products
9
Quick Start Guide
BSGew
a Select the interface from the drop down list.
b Select the Encapsulation mode.
c Once you have finished entering the information click on the Apply button at the
bottom of the panel.
d Click Next.
The Setting Up Your LAN configuration panel appears.
PPPoE Ethernet
1. Enter ISP name 1. Select whether to enable or disable the MAC
Cloning.
2. Enter the user name 2. If MAC cloning is enabled enter the MAC
address.
3. Enter the password 3. Select whether IP address assignment is
manual or dynamic
4. Enter the Host Name. 4. If the IP address assignment is manual enter
the:
- WAN IP address
- Subnet Mask
- Gateway IP Address
- Primary DNS
- Secondary DNS