Filter
Top Products
15
Configuring the 802.11b Wireless LAN DSSS PCI Card
for Windows 95 and Windows 98
To configure the PCI card for Windows 95 or Windows 98
support:
1 From the Windows Control Panel, select Network and select
e-mobility 802.11b Wireless LAN DSSS PCI Card.
2 Click the Properties tab.
3 From the Nortel Networks Easy Setup window, click the
Advanced button to view the PCI card settings. Use the
NCPA Mobile Unit, Mobile IP, Encryption, and WLAN card
tabs to view or adjust the card configuration settings.
4 Exit and save the configuration settings by clicking OK or
Finish, or select Cancel to use the default settings.
5 Restart the system for the changes to take effect.
Installing and configuring the e-mobility
driver in Windows NT
Before installing the e-mobility 32-bit Windows driver:
• Verify that the e-mobility 802.11b Wireless LAN DSSS PCI
Card is installed.
• Obtain the e-mobility 802.11b Wireless LAN DSSS Software
CD.