Filter
Top Products
*211802-A*
Installing switch software
To install the new switch software:
1 Power up the system and interrupt the boot process by pressing return on the console.
Copyright (c) 1998-2001 Nortel Networks, Inc.
CPU Slot 5: PPC 740 Map B
Version: xxxxxxx
Creation Time: Feb 21 2001, 18:06:32
Hardware Time: JUN 14 2001, 13:11:32 UTC
Memory Size: 0x04000000
Start Type: warm
/flash/ - Volume is OK
Loaded boot configuration from file /flash/boot.cfg
2 Press <Return> to stop auto-boot...
monitor#
3 Set up the new software version to boot:
monitor# choice primary image-file /flash/p80a3120.img
4 Save this configuration.
monitor# save
5 Install the boot monitor.
monitor# boot /flash/p80b3120.img
################ 8K CPU BOOT FLASH Update ################
File p80b3100b018.rom found in loaded image
File size: 624996 bytes
Number of flash sectors to be programmed: 10
WARNING: You are about to re-program your Boot Monitor FLASH
image. Do NOT turn off power or press reset
until this procedure is completed. Otherwise
the card may be permanently damaged!!!
Do you wish to continue (y/n) ? y
After this the system will come up with the new software version.
SDak.fm Page 2 Wednesday, July 11, 2001 11:54 AM