N-Tron 400 Series Switch User Manual


 
Rev 041008
14
KEY SPECIFICATIONS
Physical
Height: 2.13" (5.41 cm)
Width: 5.00" (12.70 cm)
Depth: 3.00" (7.62 cm)
Weight: ~ 1.2 lbs. (0.6 kg)
(Note: can be mounted horizontally or vertically)
Electrical
Input Voltage: 10-30 VDC (Regulated)
Input Current: 220mA max. @ 24VDC (Steady State)
Inrush Current: 14.0Amp/0.9ms max. @ 24VDC
Input Ripple: Less than 100 mV
Input Wire Size: 16-28 AWG
Environmental
Operating Temperature: -20°C to 70°C
Storage Temperature: -40°C to 85°C
Operating Humidity: 10% to 90% (Non Condensing)
Operating Altitude: 0 to 10,000 ft.
Network Media
10BaseT: > Cat-3 Cable
100BaseT: > Cat-5 Cable
100BaseFX: Multimode: 50-62.5/125µm Fiber
Singlemode: 7-10/125µm Fiber
Fiber Transceiver Characteristics
Fiber Length:
2km* 15km** 40km** 80km**
TX Power Min/Max
-19dBm/-14dBm -15dBm/-7dBm -5dBm/0dBm -5dBm/0dBm
RX Sensitivity Max:
-32dBm -34dBm -34dBm -34dBm
Wavelength:
1310nm 1310nm 1310nm 1550nm
*=Multimode ** =Singlemode
Connectors
10/100BaseT: 5 (five) RJ45 UTP Ports (405TX)
4 (four) RJ45 UTP Ports (405FX/FXE)
100BaseFX: SC or ST Duplex Port (405FX/FXE)
Recommended Minimum Wiring Clearance:
Front: 2" (5.08 cm) (405TX)
5” (12.7 cm) (405FX/FXE)
Side: 1" (2.54 cm)